Kdc w6527 manual

Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation. Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit.

Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off.

The locations of the buttons to be pressed are shown below. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. Cleaning the Faceplate Terminals If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth. Your CDs can get scratched if you put them in a dusty CD slot. It means that the unit is utilizing laser beams that are of a weaker class.

There is no danger of hazardous radiation outside the unit. This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State. For the character code, refer to the List of Codes. When using CD-RW, do full format not quick format to prevent malfunction. Entering ID3 tag Acceptable medium formats The following formats are available for the media used in this unit. The maximum number of characters used for file and folder name including the delimiter ".

For recording on an empty disc up to the maximum capacity at once, check Disc at Once. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. Loading such a medium may produce loud noise to damage the speakers. Because of this, the order in which they are expected to be played may not match the order in which they are actually played.

When removing CDs from this unit pull them out horizontally. When using a new CD If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc. It may not correctly play discs which do not have the mark. CD cleaning Clean from the center of the disc and move outward. Press the [SRC] button. Attenuator Press the [ATT] button. Each time the button is pressed the sound setting switches. First, select the speaker type with the Speaker setting.

Bass Q Factor 1. Each time the button is pressed the items that can be adjusted switch as shown below. Page 11 Each time the button is pressed the setting switches as shown below. Display Mode Switching Switching the display mode. Each time the button is pressed the display switches as shown below.

Refer to the following pages for how to select the mode. Lower text display part select 2 Press the [FM] button. The frequency for the RDS station will be displayed for 5 seconds instead of the Program Service name. No indicator is displayed if you select any item other than "Indicator".

Press the [ANG] button for at least 1 second. It can cause damage. The presently selected AUX Name is blinks. Each time the button is pressed it switches through the below displays. Press the [SW] button for at least 1 second. The audio system automatically mutes when a call comes in. Removing the Faceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. When a call comes in "CALL" is displayed.

The audio system pauses. Listening to the audio during a call Press the [SRC] button. When the call ends Hang up the phone. For that reason, keep the faceplate in its special storage case while detached. Reattaching the Faceplate 1 Align the shaft on the unit with the depression on the faceplate. The faceplate is locked in place, allowing you to use the unit. Entering the frequency and tuning. Example: Desired frequency Press button Calling up the stations in the memory.

Press the [FM] or [AM] button. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. Auto Memory Entry Putting a station with good reception in the memory automatically. Select the "A-Memory" display. When 6 stations that can be received are put in the memory Auto Memory Entry closes.

Scrolling the displayed radio text. Press the [TI] button. When a traffic bulletin starts, "Announcement" is displayed it and it switches to traffic information.

Each time the button is pressed the Program Type switches as shown below. Select another Program Type. Music: No. Refer to the 'Program Type preset' page Each time the button is pressed the language switches as shown below.

SEL M. If this happens, pay attention to safety and move the shift lever or take an appropriate action, then operate the unit. When a disc is inserted Press the [SRC] button. Select the "CD" display. S Eject the disc 1 Eject the disc Press the [0] button. Using an adapter and inserting them into this unit can cause damage. Pause and play Press the [38] button. Each time the button is pressed the song pauses or plays. Select the display for the disc player you want.

Each time the button is pressed it pauses and plays. Release your finger to play the disc at that point. Reversing Hold down on the [4] button. Canceling Direct Disc Search Press the [38] button. Press the [REP] button. Each time the button is pressed the Repeat Play switches as shown below. SEL] button. During Select mode the folder information is displayed as shown below. Select the display for the disc player you want. The Menu system basic operation method is explained here.

The reference for the Menu items and their setting content is after this operation explanation. Turning ON this control enhances the preout quality. Display Setting "Local. In Tuner mode Tuning Mode Sets the tuning mode. Select the "AMP Control" display. Press the reset button. If no connections are made, do not let the wire come out from the tab. Page Installation Installation Installation Metal mounting strap commercially available Firewall or metal support Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.

If the unit is unstable, it may malfunction for example, the sound may skip. Page Removing The Unit Removing the Unit Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Accessory2 Removal tool When the upper level is removed, remove the lower two locations. Page Troubleshooting Guide Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring.

Before calling service, first check the following table for possible problems. General The power does not turn ON. If the CD cannot be ejected or the display continues to flash Using a fuse with the wrong. Doing so will cause damage or. Doing so will. Use only the screws. If you use the wrong screws, you could. To prevent injury or fire, take the. Otherwise it may fall out of place when.

The unit may break or crack because it contains. The unit returns to factory settings when. If the unit still fails to. Normal operation should be. Therefore, what appears on the display in the.

Right after you turn on the car heater in cold. Called lens. In such. If the unit still does. Refer to the catalog or consult your Kenwood. Unsupported connection may result in damage. Setting the "O-N" Switch to the "N" position for the. The functions that can be used and the information. You must connect any of them at a time.