Miele installation manual

Do not use commercial or industrial detergents as these may cause damage, and there is a risk of a severe explosive chemical reaction such as an explosive oxyhydrogen gas reaction. Do not fill the rinse aid reservoir with powder or liquid detergent. This will cause serious damage to the reservoir. Inadvertently filling the salt reservoir with powder or liquid dishwasher detergent will damage the water softener.

Make sure you have picked up the correct packet of dishwasher salt before filling the salt reservoir! Only use special coarse grained dishwasher salt for reactivation. Do not use other salts such as cooking salt, agricultural grade or gritting salt. These may contain insoluble additives which can impair the functioning of the water softener. In an appliance with a cutlery basket depending on model cutlery is cleaned and dried more efficiently if placed in the basket with the handles downwards.

However, to avoid the risk of injury, place knives and forks etc. Plastic items which cannot withstand being washed in hot water, such as disposable plastic containers, or plastic cutlery and crockery should not be cleaned in the dishwasher.

The high temperatures in the dishwasher may cause them to melt or lose shape. Wipe dry if necessary. Detergent will clog if poured into a damp dispenser and may not be thoroughly dispersed. Please observe the information given in "Technical data" regarding the capacity of the dishwasher. Use only genuine original Miele spare parts. If spare parts or accessories from other manufacturers are used, the warranty will be invalidated, and Miele cannot accept liability.

Make the door lock inoperative so that children cannot accidentally shut themselves in. Remove or destroy the locking bracket of the door lock, and make appropriate arrangements for the disposal of the appliance. The transport and protective packaging has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites.

Ensure that any plastic wrappings, bags etc. Danger of suffocation. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.

These could be hazardous to human health and to the environment if disposed of with your domestic waste or if handled incorrectly. Please do not, therefore, dispose of your old appliance with your household waste.

You are also responsible for deleting any personal data that may be stored on the appliance prior to disposal. Please ensure that your old appliance poses no risk to children while being stored prior to disposal. This dishwasher is exceptionally economical in its use of water and electricity. This programme is the most efficient in terms of its combined energy and water consumption at cleaning normally soiled crockery.

Because the water is not heated in this programme, crockery may still be slightly damper at the end of this programme than it would be with other programmes. You can find further tips on energysaving dishwashing in "Miele's guide to dishwashing". The Consumption function is used for calling up information about the energy and water consumption of your dishwasher see "Settings menu - Consumption". After a programme has been selected, first the name of the programme and, after a few seconds, the estimated energy and water consumption will appear in the display.

The estimated consumption levels will be displayed as a bar chart. The more bars in the display, the more energy or water will be used. The values are influenced by the programme selected and any programme options selected. The consumption indicator is switched on as standard.

However, you can also switch the indicator off see "Settings menu - Consumption". At the end of the programme you can call up the actual amount of energy and water used by the programme which has just been run. Switching the dishwasher off at the end of the programme will delete the actual consumption values for the programme which has just been run. The Consumption setting gives a total of the energy and water which has been used in all previous dishwasher programmes see "Settings menu - Consumption".

At the end of programmes with a drying phase see "Programme chart" , the door will open automatically a little in order to help the drying process. If the door is opened during operation, all functions are automatically interrupted. Only open the door during operation if absolutely necessary and exercise extreme caution when doing so.

The welcome screen will appear when the dishwasher is switched on for the first time. Use the arrow buttons to select the language you want and also the country, if appropriate, and confirm your selection with OK. The current time of day must be set before you can use the "FlexiTimer" programme option. Keeping the arrow buttons pressed in will increase or decrease the time automatically.

In the event of a fault, it will help the service technician if you know the hardness of your local water supply. The dishwasher is programmed at the factory for a water hardness level of 0.

Add salt and rinse aid if necessary see "Before using for the first time - Dishwasher salt" and "Rinse aid". The programme selected will appear briefly in the display and the appropriate indicator light will come on. Then, if applicable, the estimated energy and water consumption for the programme selected will appear for a few seconds. Finally, the display will show the estimated programme duration for the programme selected. Every dishwasher is tested at the factory.

There will be residual water in the appliance from this test. It is not an indication that it has been used previously. In order to achieve good cleaning results, the dishwasher needs to operate with soft water.

Hard water results in a build-up of calcium deposits on crockery and in the dishwasher. Mains water with a hardness level higher than 0. This takes place automatically in the integrated water softener. The water softener in the dishwasher is suitable for a water hardness level of up to If the water in your area is very soft and constantly lower than 0. The prompt to add salt will be switched off automatically if the water softener has been programmed for this to happen.

Before filling the salt reservoir with dishwasher salt for the first time, you must fill it with approx. Once the dishwasher has been used, there is always sufficient water in the reservoir.

Place the funnel provided over the salt reservoir and carefully fill with dishwasher salt until the reservoir is full. The salt reservoir holds approx. Clean any excess salt from around the reservoir opening and then screw the cap on again firmly.

Immediately after filling the salt reservoir, run the QuickPowerWash programme with the Short option and without any crockery in the dishwasher to dissolve and remove any traces of salt from the cabinet. Fill the salt reservoir with dishwasher salt for reactivation when Add salt appears in the display If it appears during a programme, wait until the end of the programme. After the salt reservoir has been filled, the refill reminder may still appear in the display if the salt concentration has not yet reached the correct level.

If this is the case, confirm again with OK. The refill reminder will be switched off if you have programmed the dishwasher for a water hardness below 0.

If you only ever use multi-function combination products in your dishwasher, you can switch off both refill reminders for salt and rinse aid if you wish see "Settings menu - Switching off the refill reminders". If you switch to using detergent that does not contain salt or rinse aid, it is important to remember to add dishwasher salt and rinse aid and to switch the reminders back on.

Rinse aid is necessary to ensure water does not cling and leave marks on crockery during the drying phase and helps crockery dry faster after it has been washed. Rinse aid is poured into the storage reservoir and the amount set is dispensed automatically. Inadvertently filling the rinse aid reservoir with powder or liquid detergent will damage the reservoir.

Only pour rinse aid formulated for domestic dishwashers into the reservoir. The resulting rinsing and drying quality will not, however, be as good as when rinse aid is used. If you only ever use combination products containing rinse aid in your dishwasher, you do not need to add rinse aid.

Press the button on the lid of the rinse aid reservoir in the direction of the arrow until the flap springs open. Close the flap firmly so that it clicks into place. Otherwise water can enter the rinse aid reservoir during a programme.

Wipe up any spilled rinse aid. This prevents over-foaming occurring during the next programme. You can adjust the rinse aid dosage for best results see "Settings menu - Rinse aid".

When the Add rinse aid message appears in the display, the reservoir contains sufficient rinse aid for 2 - 3 programmes only. Do not wash items soiled with ash, sand, wax, lubricating grease or paint in the dishwasher.

Ash does not dissolve and is distributed in the wash cabinet. Wax, sand, lubricating grease and paint cause damage to the dishwasher. Crockery can be loaded anywhere in the baskets, but the following notes should be observed:. This ensures that they get properly cleaned. If in doubt, test for free movement by manually rotating the spray arms. Small items, e. Some foodstuffs may contain natural dyes, e. Plastic items in the dishwasher may discolour if large quantities of these foodstuffs find their way into the dishwasher on the crockery.

The stability of plastic items is not affected by this discolouration. Cleaning silver cutlery in the dishwasher may also cause plastic items to discolour. The glue used in these items is not dishwasher-proof and wooden handles may come loose after being washed in a dishwasher.

Silverware previously cleaned with a silver polish may still be damp or spotted at the end of a programme, where water has not run off smoothly. It may need to be rubbed dry with a soft cloth. Silver which has been in contact with foods containing sulphur can discolour. These include egg yolk, onions, mayonnaise, mustard, pulses, fish, fish brine and marinades.

Aluminium components e. These may damage the material, or in extreme cases, there is a risk of a severe explosive chemical reaction such as an explosive oxyhydrogen gas reaction. Useful tip: When purchasing new crockery and cutlery, make sure they are dishwasher-proof. If delicate glassware is washed in the dishwasher, ensure that only very low temperatures are used see programme chart , or a special glasscare programme is used depending on model.

This will reduce the risk of clouding. Riedel glassware. The yellow coded FlexAssist parts indicate which elements of the dishwasher baskets and cutlery tray are moveable. They also act as grips and have symbols embossed on them to show what the moveable parts are used for. See "Loading the dishwasher - Loading examples" for examples of how to load crockery and cutlery.

For safety reasons, do not operate the dishwasher without the upper and lower baskets in place except when running the Tall items programme, if available.

Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls, etc. Long items such as soup ladles, mixing spoons and long knives should be placed lying down across the front of the upper basket. Glasses can be arranged along the positioning rail of the cup rack to give them some support during the programme. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox.

Please check your email for further instructions. Enter a new password. Operating instructions for dishwashers To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation plan before it is installed and used for the first time. Contents Guide to the appliance Contents Selecting a programme Contents Electrical connection Guide to the appliance Guide to the appliance. Guide to the appliance Control panel.

Display General The display is used to select or set the following: — the programme — the FlexiTimer Delay start — the Settings menu The display can show the following: — the stage the programme is at — the estimated time left for the programme to run — the energy and water consumption EcoFeedback — any relevant fault messages and information To save energy, the dishwasher switches off after a few minutes if you do not press any buttons during this time.

To switch the dishwasher back on again, press the button. Settings menu The Settings menu is used to alter the dishwasher's electronics to suit different requirements. The arrows in the display indicate further options. You can use the arrow buttons next to the display, as appropriate, to select these further options. The option which is selected will have a tick next to it. Warning and Safety instructions This dishwasher complies with current safety requirements.

This dishwasher is not suitable for outdoor use. Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Miele KF S ed-3 Freezer Operating And Installation Manual Operating and installation instructionsFridge freezer combinationKF S ed-3It is essential to read theseoperating instructions beforeinstalling or using the machine,to avoid the risk of accidentor damage to the machine. Miele H B Oven Installation Instructions Manual Installation instructionsOvenH BTo avoid the risk of accidentsor damage to the applianceit is essential to read theseinstructions before it is installedor used for the first time.

Miele WKR WPS Washer Operating Instructions Manual Operating instructionsfor washing machinesTo avoid the risk of accidents or damage to the machine, it is essentialto read these instructions before it is installed and used for the first time.

Miele T C Dryer Operating Instructions Manual Operating instructionsfor condenser tumble dryerT CTo avoid the risk of accidents ordamage to the appliance, it isessential to read these instructionsbefore it is installed and used for thefirst time.

Miele Washer W W , 68 miele-wwasher This does not impair the efficient functioning of the dryer. Hermetically sealed. Global warming potential of refrigerant: kg CO 2 e Global warming potential of appliance: kg CO 2 e. This product may contain chemicals known to the state of California to cause cancer or birth defects or other reproductive harm. Caution: The fragrance can leak out of the capsule! Make sure that you always keep the capsule, or the lint filter with the capsule inserted in it, in a horizontal position when carrying and do not tip or place it down on any surface.

Use an absorbent cloth to wipe up any fragrance which has leaked out of the capsule onto the floor, the dryer or any dryer components e.

Flush eyes with clean water for at least 15 minutes. If swallowed, rinse mouth thoroughly with clean water. Seek medical attention if the fragrance comes in contact with the eyes or is swallowed! Immediately change clothes that have come in contact with the fragrance. Thoroughly wash clothing or fabric using a large amount of water and detergent. There is the risk of fire or damage to the tumble dryer if the following instructions are not observed:. Dispose of an empty fragrance capsule with the household waste and never use it for any other purpose.

This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference. The appliances may be interconnected as desired. This appliance complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. These appliances should be installed and operated with a minimum distance of 8" 20 cm between the radiator and body.

This digital device does not exceed the Class B limits for radio noise emissions from digital devices specified in the radio regulations of the Canadian Radio-television and Telecommunications Commission. The control field consists of a display and various sensor buttons. The individual sensor buttons are explained in the following sections. The program names, the drying level, and the duration of the selected program. The individual values of the selection lists for the settings. The values in the display can be changed with the sensor buttons.

The sensor button increases the value or moves the selection list up; the sensor button decreases the value or moves the selection list down. After selecting the program, you can confirm your selection with the OK button or wait until OK goes out by itself. With programs with a selectable drying level, the Perfect Dry system calculates the residual moisture present in the laundry to ensure a precise drying result. You can select extra options to augment the wash programs.

If a drying program has been. You can use the sensor button to call up an energy consumption forecast for the selected drying program. The sensor button starts the delay start function. With the delay start function, you can delay the start of the program.

The start of the program can be delayed from 15 minutes up to a maximum of 24 hours. This allows you to make use of night-time economy electricity rates, for example. The sensor button flashes slowly as soon as it is possible for a program to be started and then lights up constantly after the program has started.

For selecting programs and for switching off. The tumble dryer is switched on when you select a program, and switched off by turning the program selector to the position.

The sensor buttons react to fingertip contact. Selection is possible as long as the respective sensor button is illuminated. The basic display shows only the program duration for a time-controlled program:.

Touching the sensor button scrolls down the list to the next option and touching the sensor button scrolls up the list to the next option. The OK sensor button is used to activate the option in the display. The numerical value is highlighted in white. Touching the sensor button decreases the value and touching the sensor button increases it.

The OK sensor button is used to activate the value in the display. This dryer is designed for energysaving drying cycles thanks to its heat pump technology. However, you can save a little more energy with the following measures as the drying time is not extended unnecessarily. The higher the spin speed, the greater the savings that can be made in energy and time during drying, e. This will mean that the energy consumption for the amount of laundry is at its most economical.

If there are other heat producing appliances in the room in which the dryer is located, make sure the room is well ventilated and switch the other appliances off, if possible. The drying air flows through a heat exchanger, the drum, and several filters. This is ensured by a blower in the dryer. The refrigerant circuit regulates the heating and cooling of the drying air through the heat exchanger. The heat pump is the central component: This is a compressor that is connected to a pipeline system which is filled with refrigerant.

The heat is released into the drying air, which flows through the heat exchanger. This changes the pressure of the refrigerant. This in turn cools the front area of the heat exchanger and dehumidifies the drying air.

Please do not remove any labels e. You are requested to set the display language. Your tumble dryer is equipped with an integrated WiFi module. The dryer can be connected to the household WiFi network. Touch the sensor button until the following appears in the display: Set up later. Confirm the message with the. Before installing the dryer in its final location, ensure the signal strength is sufficient for your WiFi network. If the connection fails, you have probably not connected WPS to your router quickly enough.

Repeat the steps above. The password for your dryer consists of the last nine digits on the serial number. This can be found on the appliance's data plate. You can then select a program and load the tumble dryer as described in "2.

Selecting a program" and "3. Loading the tumble dryer". The procedure for initial set-up is completed when a program lasting longer than one hour has been carried out in full. If in doubt, wash the items several times. Make sure your laundry is spun at the maximum spin speed before drying. The higher the spin speed, the greater the savings that can be made in energy and time during drying.

There is the risk of colors running and discoloring other garments or even plastic components in the dryer. Dark colored fibers can also settle on light colored garments and vice versa. To achieve the usual finish, double the amount of starch should be used. Ensure that any foreign objects e. See "Important safety instructions" for further information. Using the tumble dryer incorrectly could cause a fire. This way you will avoid the danger of fillings coming out. These could catch fire when being dried.

Duvet covers and pillow cases to prevent small items from being rolled up inside them. This is particularly the case for garments made from very fine weave fabric, such as dress shirts or blouses. If necessary, reduce the size of the load for these types of fabric. Only use the Smoothing program for these items.

Therefore, do not overdry the fabrics to prevent them from shrinking further. Buy jersey fabrics that are one or two sizes bigger. Or for light cotton or jersey textiles. The tumble dryer is switched on when you select a program, and switched off by turning the program selector to the. When a program is selected, the program name and the maximum load weight of dry laundry possible for the program will appear in the display for a few seconds.

The selected program will be shown in the display. This will then be replaced by the standard display. Tip: In order to use MobileControl , the dryer must be logged on to the WiFi network and remote control must be switched on.

The dryer can now be operated via a mobile device together with the Miele mobile app. If you are not using a fragrance capsule: The tab must be pushed down completely see arrow. Do not overload the drum. Overloading can cause unnecessary wear and tear to the laundry, give a disappointing drying result and cause more creasing.

When closing the door, make sure that laundry does not get trapped in the door opening. Normal and Express programs. A more limited range is available when using the other programs. Soft Steam program, you must make sure that the condensed water container has been filled as described in these operating instructions see "Condensed water container".

Freshen up and Gentle cannot be combined, see "Extra options" for additional notes. You can use the sensor button to call up an energy consumption forecast for your dryer. Touch the OK sensor button or wait until the display automatically returns to the standard display.

This function is active when the setting SmartGrid is switched off. The minutes can be set in 15minute increments from 00 to Tip: The values will count upwards and downwards automatically if you keep your finger on the or sensor button. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up. Forgot password? Enter your email address and check your inbox. Please check your email for further instructions.

Enter a new password. Operating Instructions Heat-pump Dryer It is essential to read these operating instructions before installing, starting up, and using the appliance. Contents Caring for the environment Contents Extra options Contents Installation and connection Contents Settings Disposal of packaging material The packaging material protects the dryer from transport damage.

Disposal of your old appliance Electrical and electronic appliances contain valuable materials.